Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 397)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-19
Configuration - PPTPC Mode
no ppp time-btwn-reconnect
Use the PPTP Client no ppp time-btwn-reconnect command to set the time between reconnect
attempts to the default setting. To configure the time between reconnect attempts, see ppp time-
btwn-reconnect command on page 17-22.
Syntax:
(config-pptpc-{n})# no ppp time-btwn-reconnect
Example:
(config-pptpc-1)# no ppp time-btwn-reconnect
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ppp username
Use the PPTP Client no ppp username command remove the PPP username. To set a PPP user, see
ppp username command on page 17-22.
Syntax:
(config-pptpc-{n})# no ppp username username
Example:
(config-pptpc-1)# no ppp username test-user-name
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no schedule-availability
Use the PPTP Client no schedule-availability command to disable a schedule rule . To add a rule,
see schedule-availability command on page 17-23.
Syntax:
(config-pptpc-{n})# no schedule-availability
Example:
(config-pptpc-1)# no schedule-availability
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no shutdown
Use the PPTP Client no shutdown command to set the interface up (In-Service) . To set the interface
down (Out-of-Service), see shutdown command on page 17-23.
Syntax:
(config-pptpc-{n})# no shutdown
Example:
(config-pptpc-1)# no shutdown
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR