Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 365)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-23
Configuration - L2TPC Mode
ppp time-btwn-reconnect
Use the L2TPC ppp time-btwn-reconnect command configure the time between reconnect attempts.
To reset to default value, see no ppp time-btwn-reconnect command on page 15-19.
Syntax:
(config-l2tpc-{n})# ppp time-btwn-reconnect seconds
Example:
(config-l2tpc-1)# ppp time-btwn-reconnect 15
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
ppp username
Use the L2TPC ppp username command set the PPP Login User Name. To delete a PPP user, see no
ppp username command on page 15-20.
Syntax:
(config-l2tpc-{n})# ppp username username
Example:
(config-l2tpc-1)# ppp username test-user-name
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
schedule-availability
Use the L2TPC schedule-availability command to apply a schedule rule to this interface. To delete a
schedule, see no schedule-availability command on page 15-20.
Syntax:
(config-l2tpc-{n})# schedule-availability time-range schedule-
id
Example:
(config-l2tpc-1)# schedule-availability time-range 1
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
seconds Set the interval of time between reconnect attempts.
Range is 0 - 99999 seconds with a default of 0.
Field Definition
username Enter the Username, with a maximum of 19 characters.
Field Definition
schedule-id Enter an existing schedule rule name. See time-range command on
page 4-62 to set the schedule-id