No ppp on-demand, No ppp password, No ppp restart-timer – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 361: No ppp time-btwn-reconnect
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
15-19
Configuration - L2TPC Mode
no ppp on-demand
Use the L2TPC no ppp on-demand command to disable PPP on-demand. To enable PPP on
demand, see ppp on-demand command on page 15-22.
Syntax:
(config-l2tpc-{n})# no ppp on-demand
Example:
(config-l2tpc-1)# no ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp password
Use the L2TPC no ppp password command to remove the PPP password. To set the PPP password,
see ppp password command on page 15-22.
Syntax:
(config-l2tpc-{n})# no ppp password
Example:
(config-l2tpc-1)# no ppp password
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp restart-timer
Use the L2TPC no ppp restart-timer command to set the restart timer back to the default setting.
To set the restart timer, see ppp restart-timer command on page 15-22.
Syntax:
(config-l2tpc-{n})# no ppp restart-timer
Example:
(config-l2tpc-1)# no ppp restart-timer
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp time-btwn-reconnect
Use the L2TPC no ppp time-btwn-reconnect command to reset this time to the default settings.
To set the interval between reconnect attempts, see ppp time-btwn-reconnect command on
page 15-23.
Syntax:
(config-l2tpc-{n})# no ppp time-btwn-reconnect
Example:
(config-l2tpc-1)# no ppp time-btwn-reconnect
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR