Net-type, Netbios remote-brc-addr, Net-type -11 netbios remote-brc-addr -11 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 331
Advertising
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
14-11
Configuration - IPSec Mode
net-type
Use the IPSec mode net-type command to define the network type.
Syntax:
(config-ipsec {n})# network-type {dmz|lan|wan}
Example:
(config-ipsec-1)# net-type lan
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
netbios remote-brc-addr
Use the IPSec netbios remote-brc-addr command to set the remote broadcast address for NetBIOS.
Syntax:
(config-ipsec-{n})# netbios remote-brc-addr
address
Example:
(config-ipsec-1)# netbios remote-brc-addr 192.168.1.200
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
dmz
Demilitarized Zone.
lan
Local Area Network.
wan
Wide Area Network.
Field
Definition
address
Enter the remote broadcast address.
Advertising