Echo-cancel, Exit, Echo-cancel -5 end -5 exit -5 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual

Page 449

Advertising
background image

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

24-5

Configuration - Voice Port Trunk Mode

echo-cancel

Use the Voice Port Trunk echo-cancel command to enable Echo Cancellation on this trunk. To disable
Echo Cancellation, see no echo-cancel command on page 24-9.

Syntax:

(config-vport-trk-{

n})# echo-cancel enable

Example:

(config-vport-trk-1)# echo-cancel enable

Supported Platforms:

Adit 3500, MSR

end

Use the end command to exit the current Configuration mode.

Syntax:

(config-vport-trk-{

n})# end

Example:

(config-vport-trk-1)# end

#

Supported Platforms:

Adit 3500, MSR

exit

Use the exit command to close your current connection if you are in the User mode, or Privileged mode.
If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you
to the next higher level (example: back to Privileged mode from Interface configuration mode).

Syntax:

(config-vport-trk-{

n})# exit

Example:

(config-vport-trk-1)# exit

(config)#

Supported Platforms:

Adit 3500, MSR

Advertising