Signal, Signal -8 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 444
Advertising
23-8
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Voice Port FXS Mode
signal
Use the Voice Port FXS signal command to set the signaling protocol.
Syntax:
(config-vport-fxs-{
n})# signal {ground-start|loop-start}
Example:
(config-vport-fxs-1)# signal ground-start
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field
Definition
ground-start
Sets the line to Ground Start signaling
loop-start
Sets the line to Loop Start signaling
Advertising