Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 62)

3-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Privileged Mode
Example:
Adit MSR#copy path tftp://192.168.1.100/MSR_config running-
config
Adit MSR#Configuration restore: Success.
WARNING: A reload is needed for changes to take effect.
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
copy running-config
Use the copy running-config command to save the current configuration on the Adit.
Note: The TFTP server must be running on the destination device.
Syntax:
# copy running-config path {destination-path}
Example:
adit 3500# copy running-config path tftp://192.168.1.100/
a3500_config
adit 3500# Configuration save: Success
Example:
Adit MSR#copy running-config path tftp://192.168.1.100/
testconfig
Adit MSR#Configuration save: Success
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
date
Use the date command to display the current date.
Syntax:
# date
Example:
Adit 3500# date
Wed Jan 12 10:37:51 2007
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
destination-path Enter the destination path, in the form tftp://address/filename to the
location where the configuration file is to be saved.
address - Enter IP address of the TFTP server.
filename - Enter a name for this new configuration file.