Description, Description -2 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 200
Advertising
6-2
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - T1 Controller Mode
description
Use the Controller T1 description command to set the circuit ID of the T1.
Syntax:
(config-cont-t1-{
n})# description text
Example:
(config-cont-t1-1)# description T1#1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500
Field
Definition
text
Enter a description for the Controller T1.
Advertising