Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 169)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-43
Global Configuration Mode
Global Configuration Commands
no ip dhcp pool ethernet
Use the DHCP Pool no ip dhcp pool ethernet command to disable the DHCP server for the
interface defined. To enter the DHCP configuration mode, see ip dhcp pool ethernet command on
page 4-25.
Syntax:
(config)# no ip dhcp pool ethernet port
Example:
(config)# no ip dhcp pool ethernet 2
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no key
Use the no key command to disable a keyed feature. To enable a keyed feature, see the key command
on page 4-26.
Syntax:
(config)# no key key-code
Example:
(config)# no key q0B8yma2IsSL+1BarY0u
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no l2tpc
Use the no l2tpc command to disable the VPN L2TPC. To enter the VPN L2TPC configuration mode,
see the l2tpc command on page 4-26.
Syntax:
(config)# no l2tpc {l2tpc connection-id|address address}
Example:
(config)# no l2tpc l2tpc 1
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
port Ethernet port number. 1 or 2.
Field Definition
key-code Enter the key code to disable the feature.
Field Definition
connection-id Enter the name of a connection.
address Enter a destination IP address.