Configuration mode, Configuration mode -4 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 22
1-4
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Introduction
Overview
Configuration Mode
z
Allows users to configure specific features/functions.
z
Use the configure terminal command to enter from Privileged mode.
z
Identified by the (config)# prompt.
Note: As the submodes change, the words inside the parentheses are modified.
z
To exit Configuration mode, type exit or press Ctrl-Z.
z
Configuration mode has various submodes:
Configuration Mode
Link to Command
Prompt Displayed
Controller LCC
(config-cont-lcc-{n})#
Controller T1
(config-cont-t1-{n})#
DHCP server pool
(config-dhcp-eth-{n})#
Dial Peer FXS
(config-dpeer-fxs)#
Dial Peer Trunk
(config-dpeer-trk)#
Dial Peer VoIP
(config-dpeer-voip)#
Ethernet Interface
(config-int-eth-{n})#
MLPPP Interface
(config-int-mlink-{n})#
Serial Interface
(config-int-ser-{n})#
VPN IPSEC
(config-ipsec)#
VPN L2TP Client
(config-l2tpc)#
OSPF
(config-ospf)#
VPN PPTP Client
(config-pptpc-{n})#
VPN PPTP Server
(config-pptps)#
RADIUS
(config-radius)#
VLAN (Global)
(config-vlan)#
VLAN (Port)
(config-vlan-{n})#
Voice Port (Global)
(config-vport)#
Voice Port (FXS)
(config-vport-fxs-{n})#
Voice Port (Trunk)
(config-vport-trunk-{n})#
Voice Service SIP
(config-voice-serv-sip)#