Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 47)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-23
User Mode
show licenses
Use the show licenses command to display all enabled feature keys.
Syntax:
> show licenses
Example:
Adit 3500> show licenses
VPN license = No
SIP license = Yes
MGCP license = No
G729A license = Yes
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
show log
Use the show log command to display the current events on the system.
Syntax:
> show log {firewall|pri|sip|system|t1 port|lcc number}
{ severity}
Field Definition
firewall Filter firewall alarms
pri Display PRI logs. Note: This is not supported on the Adit 3104.
sip Display SIP logs.
system Filter general system alarms
t1 port Display event log for a specific T1 port.
Adit 3104: Value must be 1.
Adit 3500: Range = 1-4.
lcc number Display event log for a specific Link Cross-Connect (LCC).
MSR: Range = 1-8.
severity alert - Filter alert alarms (threshold crossing)
all - Display all alarms
critical - Filter critical alarms (service affecting)
info - Filter informational alarms
major - Filter major alarms (service affecting)
minor - Filter minor alarms (non-service affecting)