Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 360)

15-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - L2TPC Mode
no ip secondary-dns
Use the L2TPC no secondary-dns command to disable the secondary DNS. To enable the
secondary DNS, see ip secondary-dns command on page 15-12.
Syntax:
(config-l2tpc-{n})# no ip secondary-dns
Example:
(config-l2tpc-1)# no ip secondary-dns
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ppp authentication
Use the L2TPC no ppp authentication command disable PPP authentication . To enable PPP
authentication, see ppp authentication command on page 15-21.
Syntax:
(config-l2tpc-{n})# no ppp authentication
Example:
(config-l2tpc-1)# no ppp authentication
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ppp encryption
Use the L2TPC no ppp encryption command to disable PPP encryption. To enable PPP
encryption, see ppp encryption command on page 15-21.
Syntax:
(config-l2tpc-{n})# no ppp encryption
Example:
(config-l2tpc-1)# no ppp encryption
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ppp exec-timeout
Use the L2TPC no ppp exec-timeout command to disable PPP idle time. To set the PPP maximum
idle time before hangup, see ppp exec-timeout command on page 15-21.
Syntax:
(config-l2tpc-{n})# no ppp exec-timeout
Example:
(config-l2tpc-1)# no ppp exec-timeout
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR