10–configuration - dial peer voip mode, Configuration - dial peer voip mode – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 237
Advertising
C
HAPTER
10
Configuration - Dial Peer VoIP Mode
The Dial Peer VoIP Configuration commands allow the user to configure the Dial Peer VoIP
parameters.
Enter this sub-group with the (config)# dial-peer voice voip port command from the Configuration
mode.
The Dial Peer VoIP commands are represented by the (config-dpeer-voip)# prompt.
Dial Peer VoIP Commands
• destination-pattern
• do
• end
• exit
• history
• no commands
• prefix
• session-target
• strip-digits
• user-id
Advertising