Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 364)

15-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - L2TPC Mode
ppp on-demand
Use the L2TPC ppp on-demand command to enable on demand the feature. On demand attempts to
connect only when packets are sent. To disable PPP on demand, see no ppp encryption command on
page 15-18.
Syntax:
(config-l2tpc-{n})# ppp on-demand
Example:
(config-l2tpc-1)# ppp on-demand
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
ppp password
Use the L2TPC ppp password command set the PPP password. To delete a PPP password, see no ppp
password command on page 15-19.
Syntax:
(config-l2tpc-{n})# ppp password password
Example:
(config-l2tpc-1)# ppp password test-user-pswrd
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
ppp restart-timer
Use the L2TPC ppp restart-timer command to configure the PPP restart timer. To set the restart timer
to the default setting, see no ppp restart-timer command on page 15-19.
Syntax:
(config-l2tpc-{n})# ppp restart-timer seconds
Example:
(config-l2tpc-1)# ppp restart-timer 15
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
password Enter the PPP password, with a maximum of 19 characters.
Field Definition
seconds Range is 1 - 65535 seconds. Default is 3 seconds.