No ppp authentication, No ppp encryption, No ppp on-demand – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 315: No ppp password
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
13-19
Configuration - Serial Interface Mode
no ppp authentication
Use the Serial Interface no ppp authentication command disable PPP authentication
.
To enable
PPP authentication, see ppp authentication command on page 13-21.
Syntax:
(config-int-ser-{
n})# no ppp authentication
Example:
(config-int-ser-1)# no ppp authentication
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp encryption
Use the Serial Interface no ppp encryption command to disable PPP encryption. To enable PPP
encryption, see ppp encryption command on page 13-21.
Syntax:
(config-int-ser-{
n})# no ppp encryption
Example:
(config-int-ser-1)# no ppp encryption
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp on-demand
Use the Serial Interface no ppp on-demand command to disable PPP on-demand. To enable PPP
on demand, see ppp on-demand command on page 13-22.
Syntax:
(config-int-ser-{
n})# no ppp on-demand
Example:
(config-int-ser-1)# no ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ppp password
Use the Serial Interface no ppp password command to remove the PPP password. To set the PPP
password, see ppp password command on page 13-22.
Syntax:
(config-int-ser-{
n})# no ppp password
Example:
(config-int-ser-1)# no ppp password
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR