Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 396)

17-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - PPTPC Mode
no ppp exec-timeout
Use the PPTP Client no ppp exec-timeout command to disable PPP idle time. To set the PPP
maximum idle time before hangup, see ppp exec-timeout command on page 17-21.
Syntax:
(config-pptpc-{n})# no ppp exec-timeout
Example:
(config-pptpc-1)# no ppp exec-timeout
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ppp on-demand
Use the PPTP Client no ppp on-demand command to disable PPP on-demand. To enable PPP on
demand, see ppp on-demand command on page 17-21.
Syntax:
(config-pptpc-{n})# no ppp on-demand
Example:
(config-pptpc-1)# no ppp on-demand
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ppp password
Use the PPTP Client no ppp password command to remove the PPP password. To set the PPP
password, see ppp password command on page 17-21.
Syntax:
(config-pptpc-{n})# no ppp password
Example:
(config-pptpc-1)# no ppp password
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR
no ppp restart-timer
Use the PPTP Client no ppp restart-timer command to set the PPP restart timer to the default
setting. To configure the PPP restart timer, see ppp restart-timer command on page 17-22.
Syntax:
(config-pptpc-{n})# no ppp restart-timer
Example:
(config-pptpc-1)# no ppp restart-timer
Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR