How to dismantle parts, Care and maintenance – LG GR-L227YLQA User Manual
Care and maintenance
How to dismantle parts
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
Door rack and
Ice storage bin
To remove a shelf, push the shelf to the left ,
lift the left part of the shelf a bit
➀, lift the right
➂ , and take it out.
Lift the door rack holding both sides
pull it out
Hold the ice storage bin as shown in the right
figure and pull it out
while slightly lifting it .
Do not dismantle the ice storage bin unless
it is necessary.
Use both hands to remove the ice bin to avoid
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.
Pull the cover fully to the front
➀ and pull up
the rear end of the cover
➁ slightly to pull it out.
➂ Clean the floor and cover with a dry cloth.
Separate the lamp by pulling it out
➂ while slightly
➀ and rotating ➁ the lamp cover.
Turn the bulb counterclockwise. Use a 40-watt bulb
(max.) which can be purchased at a service