Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 100)

6–5 Communicating with an SLC
t
over an RS-232 Link
Publication 2755-6.8
3. Choose Edit from the Project menu to rename the project SLC.
4. Click Save to save the project under the new name and then Close
to return to the Project dialog.
Define the Bar Code Label
1. Click the Labels button to open the Bar Code Labels dialog.
2. Click the New button to define a label.
3. Click the New button to define a symbol for the label.
4. Select a symbology and any other parameters (Identifier, Lengths)
required by your application.
5. Click OK until you return to the Bar Code Labels dialog.
6. Click Save and then Close to return to the main Project dialog.