Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 62)

4–6 Downloading Match Codes via DH485 Protocol with an SLC 5/03
t
or SLC 5/04
t
Controller
Publication 2755-6.8
This section shows how to configure one the AdaptaScan Bar Code
Readers using the AdaptaScan Software (Catalog No. 2755-ASN).
The procedures in this section show how to:
•
configure a bar code label and symbol
•
define the DeviceNet node address of the AdaptaScan Reader
•
configure the scanner
•
configure the decoder trigger
•
configure the serial port
•
configure the format of messages and the message destination
The steps may vary for some procedures because of the different
requirements of applications. For example, the bar code labels may
vary from one application to the next.
Create a New Project
Create a new project named DH485 Match Code Download for the
AdaptaScan Bar Code Readers.
1. Choose New from the Project menu to create a new project.
2. Click the New button to add a bar code reader (Bar Code Reader
1) to the project.
3. Choose Edit from the Project menu to rename the project DH485
Match Code Download.
4. Click Save to save the project under the new name and then Close
to return to the Project dialog.
Configuring Bar Code
Reader 1