Connecting an slc controller to the reader, Configuring the slc controller – Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual
Page 97
Advertising
![background image](/manuals/580474/97/background.png)
6–2
Communicating with an SLC
t
over an RS-232 Link
Publication 2755-6.8
The SLC 5/03 or 5/04 occupies the first slot in a 1747 chassis.
Power is supplied externally to the 1747 chassis.
RS-232
User 0 Port
Bulletin 1747 Chassis
Power
Supply
RS-232 Cable
AdaptaScan Reader
Host Port
SLC 5/03, 5/04
SLC 500
User Port 0
GND
5
3
TX
RX
2
PIN
PIN
RS-232 Cable
Pinouts
AdaptaScan Wiring Base
RS232 Terminal Strip
The screens in this section show the software configuration for the
SLC 5/03 or 5/04 using the APS Programming Software.
•
Set the SLC 500 Channel 0 to
USER
in the Channel
Configuration Screen.
Connecting an SLC
Controller to the Reader
Configuring the SLC
Controller
Advertising