Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 207)

11–7 Communicating with a PLC-5 Processor on a DeviceNet Network
Publication 2755-6.8
This section describes how to configure the 1771-SDN Scanner
using the DeviceNet Manager software.
Before configuring the 1771-SDN Scanner, you must wire the
DeviceNet network and apply DeviceNet Address of 3 to the
AdaptaScan Bar Code Reader. See page 11–15.
To configure the 1771-SDN DeviceNet Scanner:
1. Double-click the DeviceNet Manager icon.
2. Create a new project with the network name Network 1.
3. Click the Build Online button to create a DeviceNet network.
The network should have the following nodes:
•
Node 1 – 1771-SDN Scanner Module
•
Node 3 – 2755-SNx AdaptaScan Bar Code Reader
•
Node 62 – 1787-MGR DeviceNet Manager
Configuring the DeviceNet
Scanner