Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 67)

4–11 Downloading Match Codes via DH485 Protocol with an SLC 5/03
t
or SLC 5/04
t
Controller
Publication 2755-6.8
DH485 Slave Mode
1. Click the Protocol Edit button in the Serial Port dialog.
2. Edit the parameters as follows:
•
Click the PCCC Enabled box
•
From the Master/Slave box, select Slave
•
From the Node box, select 2
This is the DH485 node address.
3. Click OK to return to the main Serial Port dialog.
4. Click Save and Close to return to the main Project dialog.