Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual
Page 155
Advertising
9–15
Communicating with an SLC 5/03 Processor on a DeviceNet
t
Network
Publication 2755-6.8
Define the Bar Code Label
1. Click the Labels button to open the Bar Code Labels dialog.
2. Click the New button to define a label.
3. Click the New button to define a symbol for the label.
4. From the Symbology list, select Interleaved 2 of 5.
5. Under Lengths, select the Length 1 check box and then type 4 in
the Through box. This indicates a 4 character length for
Interleaved 2 of 5 labels.
6. Click OK until you return to the Bar Code Labels dialog.
7. Click Save and then Close to return to the main Project dialog.
Advertising