Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 64)

4–8 Downloading Match Codes via DH485 Protocol with an SLC 5/03
t
or SLC 5/04
t
Controller
Publication 2755-6.8
4. Select a symbology and any other parameters (Identifier, Lengths)
required by your application.
5. Click OK to return to the main Project dialog.
Define the DeviceNet Address
1. Click the Device button to open the Device dialog.
2. Select a DeviceNet address.
Note: The DeviceNet address is not always the same as the
DH-485 node address. A DH-485 node address is assigned later.
3. Connect the 2755-NC43 or -NC48 cable to the reader.
4. Click the Apply button.
5. Click Save and Close to return to the Project dialog.