Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 99)

6–4 Communicating with an SLC
t
over an RS-232 Link
Publication 2755-6.8
This section shows how to configure the AdaptaScan Bar Code
Reader using the AdaptaScan Software (Catalog No. 2755-ASN).
The procedures in this section show how to:
•
configure a DeviceNet address
•
configure a bar code label and symbol
•
configure the scanner
•
configure the decoder trigger
•
configure the serial port
•
configure the content and format of messages
These procedures provide general guidelines for setting up an
application. You may need to modify the configuration for your
application needs.
Create a New Project
Create a new project named SLC for one AdaptaScan Bar Code
Reader (Bar Code Reader 1).
1. Choose New from the Project menu to create a new project.
2. Click the New button to add a bar code reader (Bar Code Reader
1) to the project.
Configuring the Reader