Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 322)

16–19 Communicating with AdaptaScan Bar Code Readers via DeviceNet Peer-to-Peer Protocol
Publication 2755-6.8
From the main Project dialog, click the Send All button to download
the configurations to Bar Code Reader 1, Bar Code Reader 2, and
Bar Code Reader 3.
When the application is running, bar code data is sent from the three
bar code readers and to the host device. When selected from the
Message dialog, the AdaptaScan Bar Code Reader routes messages
from each reader over DeviceNet to the serial port of Reader 1.
Sending the
Configurations to the
Readers
Running the Application