Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 314)

16–11 Communicating with AdaptaScan Bar Code Readers via DeviceNet Peer-to-Peer Protocol
Publication 2755-6.8
This section shows how to configure Bar Code Reader 2 on the
DeviceNet network.
Select Bar Code Reader 2 in the Project
From the Project dialog, select Bar Code Reader 2.
Define the DeviceNet Address
1. Click the Device button on the Project dialog.
2. Set the DeviceNet address to 2 for the configuration download.
3. Connect the 2755-NC43 or -NC48 Configuration Cable to Reader
2.
4. Click the Apply button.
5. Click Save and Close to return to the Project dialog.
Configuring Bar Code
Reader 2