Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 269)

13–15 Communicating with a 2760-RB Module over an RS-232 Link
Publication 2755-6.8
Create a Message
The Message dialogs define the format and content of message data
sent to the RB module by the reader when bar codes are decoded.
1. Click the Message button from the main Project dialog.
2. Under Triggered By, check the Enable check box.
3. Under Device, select Bar Code Reader 1.
4. Under Input, select [Decoder].
5. Click the New button to define a message field.
6. Under Symbol Source, select Bar Code Reader 1.
7. Under Bar Code Labels & Symbols, select Symbol 1.
8. Check (enable) the Match Exactly check box.
9. Click the Edit button to open the Message Field Edit dialog.