Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 44)

3–5 Downloading Match Codes from a Host Device
Publication 2755-6.8
Define the DeviceNet Address
1. Click the Device button on the Project dialog.
2. Select a DeviceNet address.
3. Connect the 2755-NC43 or -NC48 Configuration Cable to the
Reader.
4. Click the Apply button.
5. Click the Close button and return to the Project dialog.
Configure the Scanner
1. Click the Scanner button on the Project dialog to open the
Scanner dialog.
2. Configure the scan pattern and use the Focus procedure for
optimum scanner focus.
3. Click the Close button and return to the Project dialog.