Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 95)

5–13 Communicating with a 1746-BAS BASIC Module
Publication 2755-6.8
5. Click Save and then Close to return to the Project dialog.
From the main Project dialog, click the Send Device button to
download the configuration to the bar code reader.
If the AdaptaScan Bar Code Reader is configured correctly and the
BASIC module and SLC programs are entered as shown in this
application example, bar code data or “nr” appears in the SLC
processor M1 file.
Sending the Configuration
to the Reader
Running the Application