Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 135)

8–7 Communicating with a PLC-5
R
over an RS-232 or RS-422 Link
Publication 2755-6.8
5. Click OK until you return to the Bar Code Labels dialog.
6. Click Save and then Close to return to the Project dialog.
Define the DeviceNet Address
1. Click the Device button on the Project dialog.
2. Set the DeviceNet address.
3. Connect the 2755-NC43 or -NC48 Configuration Cable to the
reader.
4. Click the Apply button.
5. Click Save and Close to return to the Project dialog.