Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 310)

16–7 Communicating with AdaptaScan Bar Code Readers via DeviceNet Peer-to-Peer Protocol
Publication 2755-6.8
10. Click OK to return to the Bar Code Label dialog.
11. Click the Labels button to open the Bar Code Labels dialog.
12. Click the New button to define label 3.
13. Click the New button to define Symbol 1.
14. From the Symbology list box, select Code 39.
To edit parameters of the selected symbology, click the
Symbologies button.
Configure the Scanner
1. Click the Scanner button on the Project dialog to open the
Scanner dialog.
2. Configure the scan pattern and use the Focus procedure for
optimum scanner focus.
3. Click the Close button and return to the Project dialog.