Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual
Page 46
![background image](/manuals/580474/46/background.png)
3–7
Downloading Match Codes from a Host Device
Publication 2755-6.8
Configure the Serial Port
Configure the parameters of the serial port to match the host device.
1. Click the Serial Port button from the main Project dialog.
2. Under Protocol, select:
•
select Terminal
•
check (enable) the Scanner Protocol check box
Scanner Protocol is used when a host (e.g., PLC or computer) is
connected to a serial port in the reader’s wiring base.
3. From the Connection list box, select RS232.
4. Click the Edit button to configure the parameters for Terminal
protocol.
5. In the Trailer text box, type \r\n (inserts carriage return and line
feed).
6. Check (enable) the Hex Conversion check box.
7. Click OK to return to the Serial Port dialog.
8. Click Save and then the Close button to return to the Project
dialog.