Sending the configuration to the reader, Running the application – Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual
Page 140
Advertising
8–12
Communicating with a PLC-5
R
over an RS-232 or RS-422 Link
Publication 2755-6.8
From the main Project dialog, click the Send Device button to
download the configuration to the bar code reader.
Use the Monitor dialog to verify the decoding of bar code labels.
If the AdaptaScan Bar Code Reader is configured correctly and the
PLC-5 program is entered as shown in this application example, bar
code data or “no read” will be sent to the PLC user port.
Sending the Configuration
to the Reader
Running the Application
Advertising