Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 24)

1–7 Using the Auto-Load Function
Publication 2755-6.8
Configure the Match Table
The following procedure defines the contents of the match table and
the source of the symbol to be matched.
1. Click the Match Table button on the main Project dialog.
2. Click the New button to open the Match Function dialog.
3. Select the following parameters for the Match Function:
•
Under Function, select Auto-Load
•
Under Symbol Source, select Bar Code Reader 1
•
Under Bar Code Labels & Symbols, select Symbol 1 under
Label 1
•
Check (enable) the Match Exactly check box
4. Click the OK button to return to the Match Table dialog.