Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 319)

16–16 Communicating with AdaptaScan Bar Code Readers via DeviceNet Peer-to-Peer Protocol
Publication 2755-6.8
Configure the Scanner
1. Click the Scanner button on the Project dialog to open the
Scanner dialog.
2. Configure the scan pattern and use the Focus procedure for
optimum scanner focus.
3. Click the Close button and return to the Project dialog.
Configure the Decoder Trigger
Bar Code Reader 3 is triggered by its own package detect device.
Refer to Publication No. 2755-837 for other input sources that trigger the
decoder.
1. Click the Decoder button from the main Project dialog.
2. Under Bar Code Label, select Label 3.
3. Under Triggered By, select Package Detect from the Input list.
4. Click the Save button.
5. Click the Close button and return to the main Project dialog.