Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 123)

7–17 Communicating with an SLC on a DH-485 Network
Publication 2755-6.8
Define the Bar Code Label
1. Click the Labels button to open the Bar Code Labels dialog.
2. Click the New button to define a label.
3. Click the New button to define a symbol for the label.
4. Select a symbology and any other parameters (Identifier, Lengths)
required by your application.
5. Click OK until you return to the Bar Code Labels dialog.
6. Click Save and then Close to return to the main Project dialog.