Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 106)

6–11 Communicating with an SLC
t
over an RS-232 Link
Publication 2755-6.8
From the main Project dialog, click the Send Device button to
download the configuration to the bar code reader.
Use the Monitor dialog to verify the decoding of bar code labels.
If the AdaptaScan Bar Code Reader is configured correctly and the
SLC programs are entered as shown in this application example, bar
code data or “no read” will be sent to the SLC user port.
Sending the Configuration
to the Reader
Running the Application