Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 137)

8–9 Communicating with a PLC-5
R
over an RS-232 or RS-422 Link
Publication 2755-6.8
Configure the Serial Port
1. Click the Serial Port button on the main Project dialog.
2. Verify that Terminal is selected in the Protocol list box. Also
verify that the settings match the Channel 0 User settings. In this
example, RS232 is selected in the Connection list box.
3. Click the Edit button to open Terminal dialog.
4. Set the attributes as necessary.
5. Click OK to exit the dialog.
6. Click the Save and then the Close button on the Serial Port dialog
to return to the Project dialog.