Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 318)

16–15 Communicating with AdaptaScan Bar Code Readers via DeviceNet Peer-to-Peer Protocol
Publication 2755-6.8
This section shows how to configure Bar Code Reader 3 on the
DeviceNet network.
Selecting Bar Code Reader 3 in the Project
From the Project dialog, select Bar Code Reader 3.
Define the DeviceNet Address
1. Click the Device button on the Project dialog.
2. Set the DeviceNet address to 3 for the configuration download.
3. Connect the 2755-NC43 or -NC48 Configuration Cable to Reader
3.
4. Click the Apply button.
5. Click Save and Close to return to the Project dialog.
Configuring Bar Code
Reader 3