Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 70)

4–14 Downloading Match Codes via DH485 Protocol with an SLC 5/03
t
or SLC 5/04
t
Controller
Publication 2755-6.8
7. Click the Outputs button to specify which output activates when a
match occurs.
8. Under Available Outputs, select Discrete Input/Output 1.
9. Click the Add>> button to add this selection to
the Output To: area.
10. Click OK to return to the main Match Table dialog.
Configure for a Package
1. Click the Package button to open the Package dialog.
2. Click the new button to create a Package.
3. Under Mode, select No-Read or No-Match.
This mode is used to determine when a label is not read or does
not match the rule defined in the Match function.