Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 90)

5–8 Communicating with a 1746-BAS BASIC Module
Publication 2755-6.8
Define the DeviceNet Address
1. Click the Device button to open the Device dialog.
2. Select a DeviceNet address.
Note: The DeviceNet address is not always the same as the
DH-485 node address. A DH-485 node address is assigned later.
3. Connect the 2755-NC43 or -NC48 cable to the reader.
4. Click the Apply button.
5. Click Save and Close to return to the Project dialog.