Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 308)

16–5 Communicating with AdaptaScan Bar Code Readers via DeviceNet Peer-to-Peer Protocol
Publication 2755-6.8
3. Choose Edit from the Project menu to rename the project
DeviceNet Peer-to-Peer.
4. Click Save to save the project under the new name and then Close
to return to the Project dialog.
Define the DeviceNet Address
1. Select Bar Code Reader 1 from the Project dialog.
2. Click the Device button on the Project dialog.
3. Set the DeviceNet address to 1.
4. Connect the 2755-NC43 or -NC48 Configuration Cable to Reader
1.
5. Click the Apply button.
6. Click Save and Close to return to the Project dialog.