Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 114)

7–8 Communicating with an SLC on a DH-485 Network
Publication 2755-6.8
This section shows how to configure one the AdaptaScan Bar Code
Readers using the AdaptaScan Software (Catalog No. 2755-ASN).
The procedures in this section show how to:
•
define the DeviceNet node address of the AdaptaScan Reader
•
configure a bar code label and symbol
•
configure the scanner
•
configure the decoder trigger
•
configure the serial port
•
configure the format of messages and the message destination
The steps may vary for some procedures because of the different
requirements of applications. For example, the bar code labels may
vary from one application to the next.
Create a New Project
Create a new project named DH-485 Master Mode for the
AdaptaScan Bar Code Readers.
1. Choose New from the Project menu to create a new project.
2. Click the New button to add a bar code reader (Bar Code Reader
1) to the project.
Configuring Bar Code
Reader 1