Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual
Page 71
Advertising
4–15
Downloading Match Codes via DH485 Protocol with an SLC 5/03
t
or SLC 5/04
t
Controller
Publication 2755-6.8
4. Highlight Match 1 to enable the Match function.
5. Click OK to return to the main Package dialog.
Configure for an Output
1. Click the Output To button to specify which output activates
when a No-Read or No-Match occurs.
2. Under available Outputs, select Discrete Input/Output 2.
3. Click the Add>> button to add this selection to the
Output To: area.
4. Click OK to return to the main Match Table dialog.
5. Click Save and Close to return to the Project dialog.
Advertising