Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 346)

17–24 Communicating with PanelView 900
t
Terminals on a DeviceNet Network
Publication 2755-6.8
Fault Messages
These messages indicate critical fault conditions. They appear as a
full screen box with an Error #635 in the upper left corner. The
terminal must be reset to clear the condition. If the problem persists,
Allen-Bradley should be contacted and the two digit code number
associated with the error noted.
Code Indicates Recommended Action(s)
17
Client Object Failed. No way to force this. Should not occur
under normal operating conditions. Reset the terminal and if the problem reoccurs, consult
Allen-Bradley.
18
CAN Chip Failed to initialize. Should not occur under normal
operating conditions. Reset the terminal and if the problem reoccurs, consult
Allen-Bradley
37
The channel size of a particular channel exceeds the size
limitations set by the daughtercard. Should not occur under
normal operating conditions. Reset the terminal and if the problem reoccurs, consult
Allen-Bradley.
20xx
Critical Internal DeviceNet Firmware fault. Should not occur
under normal operating conditions. Reset the terminal and if the problem reoccurs, consult
Allen-Bradley.
Errors
9, 10,
11, 21,
22, 24,
25, 26,
27, 28,
29, 30,
31, 32,
34, 35,
and 36 Internal faults associated with motherboard/daughtercard
communications. Should not occur under normal operating
conditions. Reset the terminal and if the problem reoccurs, consult
Allen-Bradley.