Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual
Page 352
17–30
Communicating with PanelView 900
t
Terminals on a DeviceNet Network
Publication 2755-6.8
AdaptaScan Configuration
The AdaptaScan Reader must be configured to make data available
for the PanelView terminal. You must configure the AdaptaScan
Reader for the bar code symbology being read, the number of bar
codes, scan pattern and triggering as you would for any other
application. Refer to Publication No. 2755-838 for information
regarding the basic set up of the AdaptaScan Bar Code Reader. The
following sections only provide the information necessary to make
the data available for the PanelView terminal.
Making Bar Code Data Available
To make the bar code data available on DeviceNet, the AdaptaScan
Bar Code Reader must be configured to make the data available.
The two dialog screens shown below set up a message field that
contains the bar code data. See Publication No. 2755-838. The
fields containing Symbol 1, Symbol 2, Symbol 3, define three bar
code types configured for the AdaptaScan Reader.