Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 120)

7–14 Communicating with an SLC on a DH-485 Network
Publication 2755-6.8
Create a Message
Data sent from the AdaptaScan Reader to the SLC processor uses
messages.
1. Click the Message button from the main Project dialog.
2. Under Triggered By, check the Enable check box.
3. Under Device, select Bar Code Reader 1.
4. Under Input, select [Decoder].
5. Click the New button to create a message field.
6. Under Symbol Source, select Bar Code Reader 1.
7. Under Bar Code Labels & Symbols, select Symbol 1.
8. Check (enable) the Match Exactly check box.