Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 128)

7–22 Communicating with an SLC on a DH-485 Network
Publication 2755-6.8
From the main Project dialog, click the Send Device button to send
the configuration to Bar Code Reader 2.
Use the Monitor dialog to verify the decoding of bar code labels.
After downloading the configurations to both AdaptaScan Readers,
establish an online connection with the SLC processor. Use the SLC
data monitor screen to view the bar code data (in ASCII format) in
the N9 file.
Note: Data is not sent to the ASCII (ST) file.
Sending the Configuration
to Reader 2
Running the Application