Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 52)

3–13 Downloading Match Codes from a Host Device
Publication 2755-6.8
4. From the Settings menu open the Terminal Preferences dialog and
select Local Echo and Outbound (CR/LF).
5. Return to the terminal window and enter the data string to
download. All characters must be in uppercase.
3F10CE010003040030323030
6. Press Return to send the data.
The terminal window will display the response.
3F90
3F10CE010003040030323030
The response of 3F90 indicates a good write of the match code.
3F90
Address (3F = 63) Response Code (90 = Successful)
(94 = Fail)
Note: Refer to the next page for a description of the response
code format and codes.
You can verify whether or not a correct match code was
downloaded by placing a bar code label in front of the reader so
that it is scanned. Observe the Output #1 LED on the top of the
reader. When the downloaded match code matches a scanned
label, the output will turn on.
If you receive a response code other than 90, refer to the the
response code chart on the next page.